How to Properly Install Smoke Alarms?

How to Properly Install Smoke Alarms?

- in Latest Internet News
0
Comments Off on How to Properly Install Smoke Alarms?

Residential fires take more lives every year than other natural disasters, such as bushfires, storms, and floods combined, says a study funded by Macquarie University and Bushfire and Natural Hazards Cooperative Research Centre.

Moreover, the study said that the elderly, young, disabled, and people living alone are the common victims of residential fires. What’s heart-breaking is, most of these fatal residential fires are preventable. The study also said that most fatal house fires happened at night during winter, and more than a third of the victims were aged over 65. Moreover, these deadly fires mostly occur in the living room or bedroom.

https://www.safewise.com/app/uploads/2020/07/man-installing-smoke-detector-picture-id869078370-1.jpg

Furthermore, the fires’ common cause was from the smoking substance, like pipe or cigarette, which is caused by more than a quarter of known causes of house fires. With that in mind, you can prevent such tragedies by installing photoelectric smoke alarms from a reliable manufacturer, such as Evadare Smoke Alarms. Photoelectric smoke alarms can detect smoke from smoldering fire and alert you even before the fire starts to breakout.

Installing smoke alarms

Smoke alarms must be installed in every hallway, living area, and bedroom of the house for optimal smoke detection. Installing an alarm to places where the children sleep or where the occupants sleep with a closed door is essential. The alarms can’t detect smoke through a closed door, and kids are likely to wake up when an alarm goes off in their room.

It is strongly suggested to install smoke alarms in the hallways near the bedrooms and supplement other smoke alarms as soon as possible. On the other hand, multi-level houses should have additional smoke alarms installed between each level’s travel path.

Furthermore, if you own a private garage attached to your house, it is recommended to install a heat alarm. Installing smoke alarms in your garage would cause nuisance alarms. It is also recommended that the smoke alarms in your house are interconnected. This way, when one of the alarms detect smoke, it will activate the rest of the alarms inside your house, alerting everyone inside. If your home was built from the 1st of May 2015 onwards, the law requires you to have interconnected alarm systems.

How to position your smoke alarms?

Installing the smoke alarm systems in the right places increases their effectiveness. Below are the proper places where your smoke alarms should be located:

  • You should have smoke alarms in the center of your ceiling.
  • You can install smoke alarms on the wall, given that their place fitted between 300mm and 500mm below the ceiling.
  • If you have a cathedral ceiling, install the smoke alarm between 500mm and 1500mm from the apex.

Where should you not install smoke alarms?

Installing the smoke alarm systems in the wrong location may cause nuisance alarms, or it may not get activated once a fire starts to break out. Do not install smoke alarms near the doorways of laundries or bathrooms and in kitchens.

Remember not to put your smoke alarms in these areas:

  • 300mm of a light fitting
  • 300mm of a corner of a wall or ceiling
  • 400mm of an air-conditioning vent
  • 400mm of the blades of a ceiling fan

Residential fires are preventable if you take extra precautions. Moreover, you must install high-quality smoke alarm systems like Evedare Smoke Alarms around your home. Moreover, by installing the smoke alarm at the right places, you can rest assured that you will be alerted even once the fire starts.

You may also like

3 Things to Consider Before Job-Searching Abroad

Looking for a job is a daunting and